smartpro 230v 3kva 2.7kw line-interactive sine wave ups, extended run, snmp, webcard, 2u rack/tower, lcd, usb, db9 serial model number: SMX3000XLRT2UA description tripp lite smartpro line interactive ups with enhanced lcd interface offers network-grade power protection for critical server, network and telecommunications equipment. line interactive uninterruptible power supply (ups) with built-in auto-voltage regulation (avr) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. tripp lite's unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. interactive lcd interface reports ups operating mode, detailed ups and site-power data, plus enables a variety of ups setup and configuration options. super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. network management interfaces support communications via usb, rs-232 and optional snmpwebcard network interface. hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x. network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. includes poweralert monitoring software and complete cabling. switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. emergency power off (epo) interface. lcd display panel easily rotates for viewing in rackmount or tower configurations. audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. programmable self-test. field-replaceable, hot-swappable battery modules. features tripp lite SMX3000XLRT2UA line interactive 2u rack/tower ups with 3000va / 3kva capacity and extended runtime options line interactive ups with automatic voltage regulation (avr) corrects brownouts and overvoltages from 158 to 278v c20 ac power inlet; 8 c13 and 1 c19 output receptacles, two independently switchable output load banks maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages high 98% efficiency rating in line-power mode offers reduced power consumption and btu emisssions internal batteries offer 11.1 minutes at 50% load (1350w) and 3.9 minutes at 100% load (2700w) highlights 3kva / 3000va / 2700w line interactive 2u rack/tower ups, sine wave 230v output, corrects brownouts and overvoltages from 158v to 278v 0.9 power factor, interactive lcd interface extended runtime options up to 2700w 4 post compatible mounting accessories 98% line-mode efficiency, 2 switched load banks usb, rs232, epo and slot for snmpwebcard option 230v c20 inlet, 8 c13 & 1 c19 outlets applications ideal for server, networking and telecommunications equipment package includes SMX3000XLRT2UA ups system poweralert software with usb, serial & epo cabling 4 post rackmount installation kit set of 3 c13/c14 power cables instruction manual 1 / 5
extended runtime is available with optional external battery packs bp48v24-2u (limit 1), bp48v60rt-3u (multi-pack compatible) and bp48v27-2us (multi-pack compatible) external battery configurations require the use of tripp lite's external battery configuration software (see manual) hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment front panel lcd monitoring screen with mode and enter buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed ups and site power information lcd interface also supports a number of advanced user setup and operating preferences ships with 4 post rackmount installation hardware; optional 2postrmkitwm enables 2 post rackmount/wallmount installation; optional 2-9ustand enables tower placement built-in usb, rs-232 and optional snmpwebcard accessory monitoring options hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x included poweralert ups monitoring software; built-in emergency power off (epo) interface with cable specifications output output volt amp capacity (va) 3000 output kva capacity (kva) 3 output watt capacity (watts) 2700 output kw capacity (kw) 2.7 power factor .9 nominal output voltage(s) supported 220v; 230v; 240v nominal voltage details 230v nominal inverter output voltage frequency compatibility 50 / 60 hz output voltage regulation (line mode) +6%, -15% output voltage regulation (battery mode) +/-5% output receptacles (8) c13; (1) c19 included output power cables set of 3 c13 to c14 power cables included load management receptacles two switchable single outlet c13 load banks output ac waveform (ac mode) pure sine wave output ac waveform (battery mode) pure sine wave input rated input current (maximum load) 14.1a nominal input voltage(s) supported 230v ac ups input connection type c20 inlet 2 / 5
ups input connection description iec320-c20 input connection accepts a variety of user supplied detachable c19 output cordsets to match country or site specific power sources input circuit breakers 20a input phase single-phase battery full load runtime (min.) 3.9 min. (2700w) half load runtime (min.) 11.1 min. (1350w) expandable battery runtime extended runtime supported via optional external battery packs external battery pack compatibility bp48v24-2u (limit 1); bp48v60rt-3u (multi-pack compatible); bp48v27-2us (multi-pack compatible) dc system voltage (vdc) 48 battery recharge rate (included batteries) less than 5 hours from 10 to 90% (typical, full load discharge) internal ups replacement battery cartridge rbc58-2u battery access front panel battery access door battery replacement description hot-swappable, replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 158 to 278 overvoltage correction input voltages between 244 and 278 are reduced by 12% undervoltage correction input voltages between 206 and 183 are boosted by 12% severe undervoltage correction input voltages between 158 and 183 are boosted by 24% user interface, alerts & controls front panel lcd display front panel lcd information and configuration screen offers detailed ups and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual for detailed lcd configuration and monitoring options) switches 3 pushbutton switches control off / on power status, mode selection and mute / enter control functions alarm cancel operation power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option available audible alarm audible alarm indicates ups startup, power-failure, low-battery, overload, ups fault and remote shutdown conditions surge / noise suppression ups ac suppression joule rating 350 emi / rfi ac noise suppression yes ac suppression response time instantaneous physical 3 / 5
included mounting accessory description 4 post rackmount installation hardware included installation form factors supported with optional accessories 2 post rackmount (2postrmkitwm); wallmount (2postrmkitwm); tower (2-9ustand) primary form factor rackmount ups power module dimensions (hwd, in.) 3.5 x 17.5 x 19.5 ups power module dimensions (hwd, cm) 8.9 x 44.4 x 49.5 rack height (u spaces) 2 ups power module weight (lbs.) 62.8 ups power module weight (kg) 28.5 ups shipping dimensions (hwd / in.) 9 x 23.75 x 20.5 ups shipping dimensions (hwd / cm) 22.9 x 60.3 x 52.1 shipping weight (lbs.) 72.6 shipping weight (kg) 33 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 158 ac mode efficiency rating (100% load) 98% communications communications interface usb (hid enabled); db9 serial; epo (emergency power off); slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb, db9 and epo cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 6 milliseconds (ac to battery mode), 1 millisecond (battery to ac mode) low voltage transfer to battery power (setpoint) 158 4 / 5
high voltage transfer to battery power (setpoint) 278 special features cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries green energy-saving features greater than 95% efficiency - green ups; individually controllable load banks; schedulable daily hours of economy mode operation certifications ups certifications ce; rohs (restriction of hazardous substances) ups certification details iec 62040-1, iec 62040-2 class a emi, gost warranty product warranty period (worldwide) 2-year limited warranty ? 2015 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 5 / 5
|
